Post-Construction Anti-Termite Treatment Services

Post construction anti termite treatment is a termite control method used in buildings that are already built and occupied. Small holes are drilled along the junctions of walls and floors, a registered termiticide is injected into the soil beneath, and the holes are sealed. This creates a chemical barrier under and around the building that stops subterranean termites from coming up from the ground, while infested woodwork is treated separately.

Indeed Pest Control provides post construction anti termite treatment services for flats, independent houses, offices, shops and institutional buildings. We inspect first, map where termites are active, and treat both the soil barrier and the affected woodwork. If you have spotted mud tubes on a wall or damage in a door frame, call +91 9999-213-913 to book an inspection.

Why Post Construction Anti Termite Treatment Is Needed

Termites cause some of the most costly damage a building can suffer, and most of it happens out of sight. Post construction anti termite treatment deals with termites in buildings where the soil beneath the floor can no longer be reached directly.

Termites come from the soil. Subterranean termites, the most destructive type in India, live in colonies underground. They enter buildings through cracks in the floor, expansion joints, gaps around plumbing and electrical entries and the junction where walls meet the floor. They build mud tubes to travel without being exposed to light and air.

The damage is hidden until it is serious. Termites eat door and window frames, wardrobes, modular kitchens, wooden flooring, furniture, books and documents. They can also travel through electrical conduits and behind wall plaster. By the time damage is visible, woodwork often has to be repaired or replaced.

Pre construction treatment may be missing or worn off. Many older buildings were never treated during construction. In others, the original barrier has weakened over time or been broken by plumbing work, renovation or digging. Post construction anti termite treatment rebuilds that protection in a finished building.

Signs of Termites in Your Home or Building

Termites rarely show themselves, so it helps to know the signs. Book an inspection if you notice any of these:

• Mud tubes on walls, skirting, door frames or along pipes
• Wood that sounds hollow when tapped, or gives way under pressure
• Blistered or bubbling paint on walls or woodwork
• Swarms of winged termites near lights, especially after the first monsoon rain
• Discarded wings on window sills or floors
• Fine, powdery or gritty residue near wooden fixtures
• Doors and windows that suddenly stick or no longer close properly
• Damaged books, files or cardboard in storage areas

Finding termites early keeps the treatment simpler and the repair bill smaller.

Post Construction Anti Termite Treatment Procedure

A proper post construction anti termite treatment procedure treats both the soil barrier and the woodwork. The steps below are what a complete job typically involves.

1. Inspection and mapping: The technician inspects every room, noting mud tubes, damaged woodwork, cracks and entry points, and marks the areas to be treated.
2. Removing mud tubes: Visible mud tubes are broken and removed to expose active termite paths and check where termites are coming from.
3. Drilling along wall-floor junctions: Small holes are drilled at an angle along the junction of internal walls and the floor, deep enough to reach the soil below the floor.
4. Termiticide injection: A registered termiticide, diluted as per the label, is injected under pressure into each hole until the soil beneath is saturated.
5. Sealing the holes: Each hole is sealed with cement or a matching filler so the floor is left neat.
6. External perimeter treatment: Soil along the outside walls of the building is treated, either by drilling or by treating a shallow trench, to complete the barrier.
7. Woodwork treatment: Infested door frames, cabinets and wooden fixtures are treated by injecting or applying termiticide directly into the wood.
8. Electrical and plumbing points: Termites often travel through conduits and pipe openings, so these points are treated as well.
9. Treatment report: You are told which areas were treated and what to watch for afterwards.

Each post construction anti termite treatment procedure is adjusted to the building. A flat on an upper floor may need mainly woodwork and entry-point treatment, while a ground-floor home or independent house needs a full soil barrier along every wall.

Post Construction Anti Termite Treatment Specification

Architects, facility teams and property owners often ask for the post construction anti termite treatment specification before approving work. These are the key elements of a typical specification.

Drilling Pattern and Hole Details

Holes are usually drilled along the wall-floor junction at regular intervals, commonly around 300 mm apart, with a diameter of about 12 mm. They are drilled at an angle so the chemical reaches the soil directly beneath the wall and floor. Exact spacing and depth depend on floor thickness and the construction of the building.

Termiticide and Dilution

Only termiticides registered with the Central Insecticides Board and Registration Committee (CIB&RC) for termite control should be used, diluted as specified on the product label. The chemical is injected until the soil below each hole is saturated, so there are no untreated gaps in the barrier.

External Perimeter Treatment

Soil along the outer walls is treated to stop termites from entering from outside. Where there is open soil, a shallow trench may be dug, treated and backfilled. Where the surrounding area is paved, holes are drilled through the paving to reach the soil.

Woodwork Treatment

Infested and at-risk woodwork, such as door and window frames, wardrobes and kitchen cabinets, is treated by drilling small holes into the wood and injecting termiticide, or by applying it to exposed surfaces. Badly damaged wood may need replacement after treatment.

Reference to IS 6313 Part 3

In India, IS 6313 is the code of practice for anti-termite measures in buildings, and Part 3 covers treatment of existing buildings. Many project specifications refer to it. When comparing quotations, ask which chemical will be used, at what dilution, and which areas and junctions will be covered, so you know the post construction anti termite treatment specification is complete.

Common Mistakes That Make Termite Treatment Fail

Most failed treatments come down to shortcuts, not the chemical itself. Watch out for these when you compare quotes:

• Spraying instead of injecting: surface sprays kill the termites you see but do not reach the colony or the soil beneath the floor
• Treating only the damaged spot: termites move along walls, so treating one door frame leaves other routes open
• Skipping the external perimeter: in ground-floor homes and independent houses, termites often enter from outside
• Too few holes or too little chemical: wide gaps between holes leave untreated soil that termites can pass through
• Ignoring electrical and plumbing points: conduits and pipe openings are common hidden entry routes

A complete post construction anti termite treatment avoids these gaps by covering the soil barrier, woodwork and entry points together.

Areas Covered During Treatment

A thorough post construction anti termite treatment covers every route termites can use and every material they feed on:

• Junctions of internal walls and floors in every room
• Door frames, window frames and wooden partitions
• Kitchen cabinets and modular kitchens, especially along outer walls
• Wardrobes, bookshelves and built-in furniture
• Wooden flooring and skirting
• Electrical switchboards, conduits and junction boxes
• Plumbing entry points in bathrooms and kitchens
• Staircases, under-stair storage and store rooms
• Ground floors, basements and areas next to gardens

Our Post Construction Anti Termite Treatment Services Process

Our post construction anti termite treatment services follow a simple, clear process from first call to follow-up.

1. Booking: You call or send a request with your location and a short description of the problem.
2. Inspection: A technician visits, confirms termite activity, checks the extent of damage and identifies entry points.
3. Quote and plan: You receive a treatment plan covering areas to be drilled, woodwork to be treated and the expected time on site.
4. Scheduling: The treatment is booked at a time that suits your household or business.
5. Treatment day: Our team drills, injects, seals and treats woodwork, keeping the work area as clean as possible.
6. Follow-up inspection: We check treated areas later and treat any remaining activity.

Seen mud tubes or damaged wood? Book an inspection and our team will confirm the problem and plan the right treatment for your property.

Is Anti Termite Treatment Safe for Families and Pets?

Yes, when it is done properly. In post construction anti termite treatment, the termiticide is injected into soil under the floor and into woodwork, not sprayed across living areas, so there is very little exposure for the people living in the home.

• Holes are sealed after injection, so the chemical stays below the floor
• Food, utensils, toys and pet bowls are covered or moved before treatment
• Children, elderly members and pets are kept out of the rooms being treated
• Rooms are ventilated before they are used again
• Registered termiticides are used at label dilution

If anyone in the home is pregnant, has asthma or other health concerns, tell us when booking so we can plan the treatment around them.

How to Prepare for Treatment and What to Do After

A little preparation helps the treatment go smoothly.

Before treatment:

• Move furniture slightly away from walls so the wall-floor junctions can be reached
• Empty lower kitchen cabinets and wardrobes where termites are active
• Cover or store food, utensils and personal items
• Keep children and pets away from the rooms being treated
• Point out every place where you have seen termites or damage

After treatment:

• Keep treated rooms closed for the time advised, then ventilate them
• Avoid washing or scrubbing the sealed holes for a few days
• Do not dig along the outer walls or disturb treated soil
• Keep wood, cartons and papers off damp floors and away from walls
• Report any new mud tubes or winged termites so they can be checked

Once the termite work is done, our residential pest control services can take care of cockroaches, ants and other household pests.

Post Construction vs Pre Construction Treatment

Both treatments create a chemical barrier against subterranean termites, but they are carried out at different stages.

• Pre construction treatment is done while the building is being built. The soil in the foundation trenches, backfill and plinth is treated before the floor is laid, so the barrier covers the whole footprint without any drilling. For new projects, pre-construction termite control is the most complete option.
• Post construction anti termite treatment is done in finished buildings. Because the floor is already laid, the chemical has to be injected through drilled holes along walls and floor junctions, and woodwork is treated directly.

Some new buildings also install a termite piping system during construction, which allows the soil to be re-treated later without drilling through floors.

Buildings We Treat

Post construction anti termite treatment is useful for almost any building where termites are active or likely. We treat:

• Flats and apartments, especially ground-floor units and those with wooden interiors
• Independent houses, villas, builder floors and farmhouses
• Offices, shops and showrooms
• Schools, hospitals and hotels
• Warehouses, factories and storage buildings

For ongoing pest management in business premises, our commercial pest control and industrial pest control services cover other pests throughout the year. Housing complexes can also arrange society pest control for common areas, which works well alongside termite treatment in individual flats.

What Affects the Cost of Post Construction Anti Termite Treatment

The cost of post construction anti termite treatment depends on the property and the extent of the problem, so we confirm the price after an inspection. The main factors are:

• Size of the property: the total length of wall-floor junctions to be drilled
• Floor level: ground-floor homes and independent houses usually need a full soil barrier
• Extent of infestation: a few active spots cost less than termites spread across the property
• Woodwork to be treated: number of door frames, cabinets and wardrobes affected
• External treatment: whether the outer perimeter needs drilling or trenching
• Flooring type: marble, granite or wooden flooring may need extra care when drilling

Treating termites early costs far less than replacing a modular kitchen or door frames later. Call +91 9999-213-913 to arrange an inspection and a quote.

Why Choose Indeed Pest Control

Indeed Pest Control has been providing pest management for more than 25 years, for homes, offices and commercial properties. In post construction anti termite treatment services, that experience shows in careful inspection, clean drilling work and honest advice about what the treatment can achieve.

• Inspection before treatment, with every active area mapped
• Soil barrier and woodwork treatment in the same visit
• Registered termiticides at label dilution
• Neat sealing of drilled holes
• Service across Delhi, Noida, Gurgaon, Ghaziabad and Faridabad

To book post construction anti termite treatment for your home or building, call +91 9999-213-913.

Book Post Construction Anti Termite Treatment

Termites do not stop on their own, and the damage grows every month they go untreated. Call Indeed Pest Control on +91 9999-213-913 to book post construction anti termite treatment and protect your home or building.